!
!
ROUTER BITS/PLUG CUTTERS/COUNTERSINK
!

12 PIECE ROUTER BIT SET 1/2"

Draper
72893

Draper 12 Piece Router Bit Set 1/2"  72893 Assortment of router bits with TCT heads, suitable for most applications

3 x straight bits - 6, 12 and 16mm dia.  90° ‘VÕ grooving (or groove) bit  dovetail bit 12.7mm dia.  45° chamfer bit  bearing flush trim bit (or flush) - 12.7mm dia.  2 x rounding bits - R 6.3, R 9.5mm  core box bit R 6.3mm  cove bit R 6.3mm  roman ogee bit R 4mm  hexagon key R = radius, all other measurements are diameters

12 PIECE ROUTER BIT SET 1/4"

Draper
72892

Draper 12 Piece Router Bit Set 1/4" 72892  Assortment of router bits with TCT heads, suitable for most applications

 3 x straight bits - 6, 12 and 16mm dia.  90° ‘VÕ grooving (or groove) bit  dovetail bit 12.7mm dia.  45° chamfer bit   bearing flush trim bit (or flush) - 12.7mm dia.  2 x rounding bits - R 6.3, R 9.5mm  core box bit R 6.3mm  cove bit R 6.3mm  roman ogee bit R 4mm  hexagon key R = radius, all other measurements are diameters

32 x 12mm REBATE TCT ROUTER BIT

Draper
75344

Draper 32 X 12mm Rebate TCT Router Bit 75344

Use for cutting slots jointing biscuits. Twin flute TCT Head.

12.7 x 6.35 RADIUS CORE TCT ROUTER BIT

Draper
75345

Draper 12.7 x 6.35 radius Core TCT Router Bit 75345

Use for round bottom cuts. TCT Head.

19 x 25mm TCT STRAIGHT ROUTER BIT

Draper
75351

Draper 19 x 25mm Straight TCT Router Bit 75351

Use for straight cuts.  TCT Head.

14mm DOVETAIL TCT ROUTER BIT

Draper
75346

Draper 14mm Dovetail TCT Router Bit 75346

Use for dovetail joints.  TCT Head.

4 PCE PLUG CUTTER SET

Draper
87806

Draper 4 Pce Plug Cutter Set 1/4", 3/8", 1/2", 5/8" 87806

Cuts wood plugs for counterbored holes, achieving a near invisible finish.

16mm COUNTERSINK BIT

Draper
10573

Draper 16mm Countersink Bit 6mm shank. 10573

General purpose bit for use on wood or plastics. Suitable for use with hand or power drills. Shank diameter 6mm.

16mm ROSEHEAD COUNTERSINK BIT - EXPERT

DRAPER EXPERT
19235

Draper Expert Quality - 16mm Rosehead Countersink Bit 8mm shank. Draper 19235

The 90º head incorporates 5 cutting edges and an 8mm diameter shank 

Expert Quality, manufactured from high speed steel hardened and tempered to 55HRC for long life. The 90° head incorporates five cutting edges and an 8mm diameter shank. Suitable for use with hand or power drills on hard or softwood, metals and plastics.