GENERAL ENGINE SERVICING TOOLS

For a convenient way to smoothly and quickly position bearings without damage to bearing or bearing cage.

For easy removal of alternators and free-wheel pulleys either on or off the engine.

Can be operated by hand or foot - using this switch avoids an assistant to crank the engine while carrying out the following tune up tests:- Setting the dwell angle setting tappets and valves. Compression testing. Fuel pump and fuel pressure tests. Checking the starter motor. Checking the generator/alternator.

designed to avoid accidental cranking or starting of automotive engines....

For honing out large bore engine cylinders on cars, vans, trucks, marine and industrial applications 51 - 177mm....more...

for use on GM (Vauxhall/Opel), Ecotec 1.8, 2.0 16 Valve engines fitted to Astra, Cavalier, Calibra, Vectra and Omega models.

for use on GM(VAUXHALL/OPEL) ECOTEC 1.4 AND 1.6 16 VALVE ENGINES FITTED TO ASTRA, CORSA AND TIGRA MODELS.

for locking single and twin camshafts on GM (Vauxhall/Opel) Ecotec 16V petrol engines. Manufactured from anodized aluminium. For details and concise instructions on the correct use of this tool, refer to the vehicle manufacturer´s or Haynes workshop manual

For use on GM (Vauxhall/Opel) OHC 1.2, 1.4, 1.6, 1.8 and 2.0 petrol engines. OHC 1.6 and 1.7 diesel engines, ISUZU 1.5 and 1.7 diesel engines.

For use on GM (Vauxhall/Opel) Cavalier/Calibra 2.5, Vectra 2.5, Omega 2.5/3.0, Omega, 2.5/3.0, Frontera Sintra 3.0, SAAB 900 2.5, 9000 3.0 V6 Petrol Engines.

For use on 1.6 and 1.7 OHC diesel engines fitted to Mark 1 and Mark 11 Vauxhall Astra, Belmont, Cavalier, Corsa, Nova Kadett and Vectra. This allows cam timing to be reset when (for example) the timing belt has been disturbed, when replacing the injector or waterpump.

Connects to 13mm (1/2"), 16mm (5/8") and 19mm (3/4" heater hoses. Uses water via a standard garden hose.

Protects arms and hands from oil spills and runs.....more..

Used to adjust and measure the tension on drive belts. Suitable for various serpentine and camshaft belt thicknesses. Clear dual scale graduations. WARNING: Attempting to remove/replace and adjust a vehicles timing belt is problematic requiring specific knowledge of the procedure involved. Failure of an ill fitted or incorrectly adjusted timing belt will result in extensive and costly engine damage.

Manufactured from plastic.

An effective tool for priming fuel lines especially after the replacement of fuel pumps and filters.

Ideal for working in confined engine bays.  

Fully adjustable head for use in confined areas.

Fits both straight and angled ´Zerk´style fittings.