!
!
BODYWORK / WINDOW SCREENS
Tools and equipment for the maintenance and repair of vehicle bodywork and window screens.
!

WINDSCREEN WASHER NOZZLE TOOL

DRAPER
03322

Draper Expert Vehicle Washer Jet Cleaning Tool 03322

knurled body with pocket clip, needle point one end and scriber point on the other. For cleaning and repositioning of vehicle washer jets. Supplied with end caps to prevent personal injury when not in use.

SYNTHETIC JUMBO SPONGE

Draper
40418

Draper - Synthetic Jumbo Sponge 40418

High density, very absorbent.  Suitable for all surfaces and paint surfaces

MESH COVERED SPONGE

Draper
07009

Draper - Mesh covered sponge 07009 - Ideal for removing dead insects and other debris from glass, painted surfaces and vehicles.

Size 180L x 95W x 45 D

WINDOW WINDER CLIP REMOVAL TOOL

Draper
52580
Draper - Window Winder Clip Removal Tool 52580 

For the removal and installation of the spring clips used on window winder handles fitted on GM (Vauxhall/Opel) models.

 

COPPER / RAWHIDE FACED 38mm HAMMER

Draper
20088

Draper Expert Quality Copper / Rawhide Faced Hammer 20088

1100g (38oz) with a heavy malleable iron head with a copper and rawhide face.

 

COPPER / RAWHIDE FACED 32mm HAMMER

Draper
20070

Draper Expert Quality Copper / Rawhide Faced Hammer 20070 680g (24oz) with a heavy malleable iron head with a copper and rawhide face.

The copper face (32mm) is especially suitable for dismantling and assembly work where it will help to avoid damaging component parts.  The rawhide face (32mm) is ideal for use on materials where bruising needs to be avoided. An excellent dual purpose hammer.  Shaped wood shaft.

SOFT FACED HAMMER 38mm

Draper
72027

Draper Expert Quality - 680g (24oz) Soft Faced Hammer 72027

For use on a wide variety of materials where no surface marking is needed.

 

4 PIECE BODY FILLER APPLICATOR SET

Draper
44100
Draper 4 piece Body Filler Applicator Set 44100

Sizes:  50, 80, 100, 120mm (approx)

Sprung steel blades.

SLIDE HAMMER KIT

Draper
52321
Draper -  9 Pce Slide Hammer Kit 2.3kg slide hammer with 470mm shaft 52321

2.3kg slide hammer with 470mm shaft.....more..

6 PIECE DOWEL PIN PUNCH SET

Draper
13037
Draper - 6 Piece Dowel Pin Punch Set 13037 Designed for the safe removal of spring dowel or roll pins.

These specialist punches are manufactured from Chrome Vanadium Steel, hardened and tempered to 45HRC and chemically blacked.  The punch has a shaped end for positive location and an undersized body to prevent jamming.    The punches are suitable for metric or imperial pins. contents:  3.0(1/8"),  4.0 (5/32"),  5.0 (3/16"),  8.0 (1/4") and  9.5mm (3/8")